Start your first robot in Peaceful
In Savebot: The Last Garden, open the Workshop in Peaceful and inspect the tests already supplied for the robot. Use them to tell when a simple action will run, then watch the robot to see the matching situation in the world.
Full Steam release unless a source specifies the demo. Evidence checked . Guide updated .
Steps
- Choose the robot you want to teach and read its program in the Workshop. The point of the supplied tests is to give you a starting condition you can inspect while learning what each action does.
- Use one concrete action, such as collecting, and find which useful tests govern it. Read the sentence under the block editor and look at what it says will happen when the test changes.
- Run the program and observe one cycle. If the robot picks a different action than you expected, compare the selected robot’s live condition value with the sentence before changing the program.
How to tell it worked
You can name the action the robot took and identify the supplied test that selected it.
If you are still stuck
If you want to design the tests yourself, Balanced is the mode with player-built block tests. The Peaceful program can still require world-specific decisions.
Turn a supplied test into a prediction
In Peaceful, begin with the Workshop open for the robot you intend to teach. Choose one supplied test whose meaning you can see in the world. For a Collector, cargo is a useful example because you can watch it change during pickup. Read the sentence below the blocks and identify the job that depends on the test. Before starting, predict what you expect the robot to do under its current condition.
Observe it through one action and check your prediction. If the robot collects material and still has space, write down what action should follow. Once the next visible state changes, look again at the condition indicator. A short test lets you learn what one supplied condition actually measures. You can then understand why the next job starts without building a general program for the whole settlement.
Diagnose an unexpected decision in the correct place
If the robot takes a different action, check the selected robot and the first test that can change the outcome. A robot running its own routine may move nearby while your Workshop is open on another one. Keep the selected robot in view through the test when possible. Compare the readback sentence, live value and action on that same robot. If a higher-priority action was selected first, wait until the intended test is relevant before deciding it failed.
If the value stays the same, choose a situation where you can clearly see whether it should differ. A partially loaded Collector and one visibly carrying a full load make a more useful comparison than two trips under similar conditions. If the state changes and the intended action starts, follow the robot to the expected target. An action beginning at the right time can still have an unsuitable target.
Extend the job after seeing it work twice
Let the robot complete one action and come back to a useful decision. A routine that works only on the initial scene gives you little confidence about the following cycle. Before introducing a new task, keep a record of what should happen if the starting state returns. When testing a second robot, start with one supplied condition for its job and observe it separately. Peaceful lets you use the supplied tests while you practice predicting when a behavior will run. The point of the first test is a robot you can explain as it works, even when you're still learning the rest of Noma.
Reuse a Peaceful test on a clean example
If your first Peaceful attempt had several competing jobs, observe the same condition on a simpler route. For example, follow cargo changes before introducing another world task. Once that example is readable, return to the original robot and find which action interrupted the sequence.