Mow grey fungus to leave fertile soil

In Savebot: The Last Garden, use a robot to mow the grey fungus in Sylve. Forgeur Games says mowing leaves fertile soil behind. Test one patch and inspect the ground before expanding the routine.

Full Steam release unless a source specifies the demo. Evidence checked . Guide updated .

Steps

  1. Identify a grey patch and choose the robot and action available for mowing it. Start with a small area whose before and after state you can recognize.
  2. Run one pass and check the soil after the robot works. If part of the area remains grey, look at whether the robot reached it and whether its program selected the mowing action.
  3. Add a repeat or expand the area only after the first patch gives the expected result. Use root-network grafting where you need a different method of addressing a surrounding patch.

How to tell it worked

A test patch loses the grey fungus and leaves soil that the game recognizes as fertile.

If you are still stuck

If the robot moves through the patch without clearing it, inspect the current block and the target. Grafting at a root boundary has a different outcome from cutting an individual patch.

Choose a patch where you can see the ground afterward

Find an edge of grey fungus and pick a piece you can return to using a landmark. Select the robot and verify that it runs the mowing action. Forgeur Games describes the result as fertile soil. Watch where the action takes place and inspect that exact patch when the robot leaves it. Compare with adjacent grey ground. This gives you evidence that the cleared soil came from the job you just observed.

If the robot moves across the grey area but does not mow it, follow the active action in the Workshop. Check whether the task it selected matches the one you meant and whether you were watching the chosen robot. If it mows at a different point, note both the intended patch and the point it reached. Keep the target fixed while adjusting how the robot gets there. That isolates the location mistake before you change the program's other decisions.

Test the intended use of the fertile soil

Pick the next task that led you to clear the fungus. If you intended to use that patch for a compatible plant, inspect the current world state and available tools at the cleared spot. Make a small test there. Compare it with a known working area if the action fails. If fertile soil is visible and your next action still fails, inspect the planting job and what the current game requires. A successful mow answers how the chosen patch was cleared.

Keep mowing separate from grafting when you diagnose a retreating grey area. Grafting extends a root boundary and helps enclose the grey. Mowing addresses the exact spot where the robot cuts. Use the boundary guide if your goal is to surround a larger area. Finish the first cleared-patch test before changing a root network nearby so the two outcomes are easy to distinguish.

Observe coverage before expanding the route

Test a second, adjacent patch after the first one works. Check that the robot moves to the second target instead of cutting the first spot again. A working action can appear to stall if the job selects an area it already cleared. Compare the actual position of the mowing action with the remaining grey edge. If the action stops when the robot takes another job, use that switch as the next point to watch.

When the game gives a placement restriction or an unavailable action near the fungus, keep that wording with your location. It helps you distinguish a patch the current robot can mow from one that needs a different setup. If both tests cleared the fungus and one failed to support your next job, compare that next action at each location. Expand the work once you can recognize the clearing and the soil left behind on more than one pass.

Related tasks

Sources