Shelter robots from a solar flare
In Savebot: The Last Garden, teach Twilight robots to go to the shade of a sail or to mild ground when a solar flare arrives. Check the active flare’s information and verify robots reach the shelter rather than merely turning toward it.
Full Steam release unless a source specifies the demo. Evidence checked . Guide updated .
Steps
- Read the active threat and identify the response window. Locate shade under a sail or mild ground the robot can reasonably reach from where it works.
- Add the shelter behavior before the ordinary job it must interrupt. Choose the in-game trigger or condition visible in the Workshop, since the developer announcement does not name a command or a numeric threshold.
- Observe the robot from trigger to arrival. Check the transition back to ordinary work afterward so sheltering does not leave it stuck away from the next task.
How to tell it worked
The robot breaks from its job and reaches shade or mild ground during the relevant flare event.
If you are still stuck
If it never leaves its job, inspect the branch selected by the actual flare condition. If it starts moving but arrives too late, check the chosen shelter and the distance from the work area.
Choose shelter from the robot's working area
Read the active flare information and find the shade from a sail or a place on mild ground. Pick a robot whose route you can follow. Identify where it spends the time before the warning and trace the route it would have to take to the shelter. Start with a candidate you can observe clearly. A sail that is easy to see does not tell you whether the robot arrived at its actual shade.
Compare a robot working close to the intended shelter with one farther away if you need to protect several. Use the more distant journey to check your plan. Watch when the robot stops its ordinary job and when it reaches the protection. These two observations matter more than seeing its direction change. Use the current warning's countdown rather than estimating a universal travel or exposure time.
Distinguish a missed warning from a slow trip
If the robot never turns away from its original work, select it in the Workshop and inspect the condition responding to the flare. Check whether that part of the program runs at the right time. A robot can continue an earlier job if the program never reaches the shelter decision. Look for the first action it should have chosen after the warning appeared.
If it travels to shelter but arrives after the danger, leave the trigger as it was for a comparison. Test a nearer route or a different appropriate shelter. If it stops close to the sail and remains exposed, inspect where it actually stopped and whether the shade covers that spot. Confirm the result rather than relying on the shape of the route or the name of the object selected.
Check whether normal work resumes after protection
Watch the robot when the flare condition clears. Decide what ordinary job it should resume and see whether the program reaches that decision. On a heat delivery route, verify a fresh gathering trip or relay transfer instead of counting the travel back as recovery. If it leaves the protected area too early, compare the moment it left with the warning's condition and the program's branch.
Keep a note of the starting area, the intended shelter and the point where an unsuccessful trial stopped. Use that information when adding a response to a second robot. The right candidate may differ when that robot starts from another part of Twilight. A complete test shows it reacts, reaches protection in time and can return to its role afterward.