Twilight

Move heat through relays and teach your robots to shelter from solar flares.

Confirm where heat enters the chain

Start on a piece of hot ground that a robot can reach and choose one heat relay. Observe the gathering robot before and after it acts on the hot ground, then watch it travel to the relay and deposit its load. If the robot reaches the relay carrying nothing, examine the gathering instruction and the source it selected. If it arrives carrying heat and the relay does not receive it, inspect the deposit action and its target.

Choose a second robot to take heat from that same relay. If it arrives before the deposit, watch a test where the first robot has already completed the delivery. If it successfully takes the first load but the next load is missing, trace the producer again from ground to deposit. This separates an empty relay from a withdrawal that never runs. Use the heat state the game exposes for your setup, since the developer supplies no numeric relay threshold.

Place the handoff where you can verify both routes

For the first candidate spot, watch both robots move in. If a later relay arrangement is hard to debug, return to one working producer and one recipient. Check whether it is the same relay on both sides, particularly if you can see several structures in the area. Measure the usefulness of any change by the completed handoff, including delivery and collection. A relay the producer reaches more quickly can still make the consumer's trip harder.

Decide what stopped between a visible heat deposit and a later empty relay. It may help to leave other consumers out of your test and watch the intended recipient's actual action. If the load is missing even before that robot arrives, note whether another robot used the relay. If the load remains accessible and the robot performs another job, trace the program branch before changing the heat source.

Make a separate plan for a solar flare

Use the ongoing flare's information and check for a route to shade under a sail or to mild ground. Start with the robot farthest from the intended shelter. Compare when it sees the condition, when it stops its ordinary job and when it actually arrives. Those are useful observations even if your nearest robot makes it safely.

If the responder heads toward a sail and stops short, check the actual shade and the journey from its work area. If it never turns away from the heat route, inspect where the shelter condition sits relative to the routine it is already running. After the danger passes, observe whether it returns to a safe working cycle and a relay handoff can complete. That is a stronger recovery check than seeing the robot move once while the warning is on screen.

Use the relay to narrow a problem after the flare

Inspect the relay state just before the producer or recipient goes back to work. If the receiver returns first, it may find the stock depleted even though the interrupted routine is about to refill it. Observe the next deposit and compare the heat that reaches the recipient with the pre-flare sample. If neither robot resumes, look at each robot's shelter branch. If only the second handoff fails, trace its target before making the producer gather more.